Description
The Pacemaker Triplex Pump design has evolved over the years since it was first designed and manufactured. Significant changes were made towards a continuous design improvement. Listed below is a summary of the different types of design and corresponding features of each type.
Type I—this was the original design of the complete pump assembly. This is now obsolete.
Original design power end frame (a welded frame was utilized in the past)
Power end utilized a cast steel crankshaft
Original design of fluid end cylinder utilized line pipe threads on the gauge ports
Fluid End utilized a horizontal suction valve design
Original style packing utilized springs
Type II—this is an improved design that incorporates stronger components
Power end frame is made from high strength cast alloy steel
Power end utilizes a forged steel crankshaft
Fluid end cylinder utilizes ACME threads on the gauge ports
Fluid End utilizes a horizontal suction valve design
Packing assembly utilizes a header ring and pressure rings
The same (STD) fluid end cylinder is utilized for fluid end assemblies with 3.5-in., 4.0-in., 4.5-in., and 5.0-in. plunger and packing assemblies
Fluid end assembly utilized hollow plungers
Type II will become Type V when the hollow plungers are replaced with solid plungers
Type III—this type was never released (top level drawings not made). This may have been reserved for a pump assembly with small (2.0-in., 2.5-in., and 3.0-in.) fluid ends.
Type IV—this is a pump assembly with large, valve-over-valve fluid ends
Power end assembly is the same as a Type II power end
Fluid end assembly utilizes a large (5.0-in., 5.5-in., and 6.0-in.) valve-over-valve fluid ends
Type V—this is a new (improved) design of a standard Pacemaker Pump Assembly
Pump assembly is not certified by any third party
Power end utilizes a forged steel crankshaft and is the same as a Type II power end
Fluid end cylinder utilizes ACME threads on the gauge ports
Fluid end utilizes a horizontal suction valve design
Packing assembly utilizes a header ring and pressure rings
Fluid end assembly utilizes solid plungers
Type VI—this is a new (improved) design of a Third Party Certified Pacemaker Pump Assembly
Pump assembly is ABS/DNV/CE certified
Power end utilizes a forged steel crankshaft
Fluid end cylinder utilizes ACME threads on the gauge ports
Fluid end utilizes a horizontal suction valve design
Packing assembly utilizes a header ring and pressure rings
The same (STD) fluid end cylinder is utilized for fluid end assemblies with 3.5-in., 4.0-in., 4.5-in., and 5.0-in. plunger and packing assemblies
Fluid end assembly utilizes solid plungers
Pressure retaining and load bearing parts utilize material certified to PED
1.TRIPLEX PUMP
MAKE: BAKER HUGHES
MODEL: PACEMAKER
RATED MAXIMUM INPUT POWER: 700 BHP
GALLONS/REV: 0.48 (95% V.E.)
2.POWER END ASSEMBLY
MAXIMUM CRANK SPEED: 450 RPM
GEAR RATIO: 4.06:1
MAXIMUM ROD LOAD: 160,000 LBf
STROKE LENGTH: 4″
INPUT DRIVE: 1810(FOR -1 & -3)/ 1880/1910(FOR -2)
CRANKSHAFT: COUNTER BALANCED ASSEMBLY
LUBE OIL SUMP: STANDARD 16 GALLON
3.FLUID END ASSEMBLY
PLUNGERS: 3.5″ DIA., HARD METAL COATED,
MAXIMUM WORKING PRESSURE: 15,000 PSI
PLUNGER PACKING: HEADER RING STYLE
| Part Number or Drawing Number | Description | QTY |
| 86839 | Pacemaker 3.5RH/CW Pump Assembly | |
| L120270-5 | PMP, FLUID END ASSY 3.5 LESS DISCH CONN | 1 |
| L114501RH-1 | PMP, PWR END RIGHT HAND 4.06 CW 1810 | |
| L11282012 | PMP, DISCH CONN 2.0-1502 W/ BUSHING | 1 |
| L11282014 | CONN ASSY, DISCH 2.0-1502 OPEN BORE | 1 |
| L600180-1 | PMP, SHIPPING SKID | 1 |
| L114501RH-3 | PMP, PWR END RIGHT HAND 4.06 CW 1880 | 1 |
| L18-0007 | SWVL, 2.0-1502F S-50 FXPMP | |
| 86840 | Pacemake 4.5 LH/CW Pump Assembly | |
| 120270-7 | PMP, FLUID END ASSY 4.500 STD FRAC & ACID | 1 |
| 114501LH-2 | PMP, POWER END LEFT HAND 4.06 CW 1810 | |
| 11282012 | PMP, DISCHARGE CONN 2.0-1502 W/ BUSHING | 1 |
| 11282014 | CONNECTION ASSY, DISCH 2.0-1502 OPEN BORE | 1 |
| 600180-1 | PMP, SHIPPING SKID | 1 |
| 114501LH-4 | PMP, POWER END LEFT HAND 4.06 CW 1880 | |
| 120270 | 3.5-5.0 Standard Pacemaker Pump Fluid End Assembly | |
| 112814 | PMP, RAM WASH & PKG LUBE CVR ASSY | 1 |
| 112519 | PMP, DISCHARGE COVER STANDARD FLUID END | 3 |
| 36627BJ-1 | VALVE ASSY, DISCH PACEMAKER PMP | 3 |
| 112821-1 | MANIFOLD, SUCTION PMP STANDARD FLUID END | 1 |
| 112505-1 | PMP, SUCTION COVER CASTING F/STD FE SUCT CVR | 3 |
| 36585BJ-1 | PMP, SUCTION VALVE ASSY FOR CEMENT 60# SPRING | 3 |
| 120269-1 | PMP, FLUID END MACHINED 3.5-4.0 -4.5-5.0″ | 1 |
| 21715 | PMP, FLUID END ADAPTER ASSY 2.0 1502F | 2 |
| 18-0007 | SWIVEL, 2.0-1502F S-50 FXPMP | 1 |
| 11282012 | PMP, DISCHARGE CONN 2.0-1502 W/ BUSHING | 1 |
| 136542-1 | PMP, PLUNGER PACKING ASSY 3.5 HEADER RING CYLINDRICAL | 3 |
| 136543-1 | PMP, PLUNGER PACKING ASSY 4.0 HEADER RING CYLINDRICAL | |
| 136544-1 | PMP, PLUNGER PACKING ASSY 4.5 HEADER RING CYLINDRICAL | |
| 136545-1 | PMP, PLUNGER PACKING ASSY 5.0 HEADER RING CYLINDRICAL | |
| XAS-429-02 | O-RING, 429 NITRILE 90 DURO | 3 |
| 118408 | SCREW, CP 12PT 1.500-6NC X 12.000 8Z | 12 |
| 940584-59 | SCREW, SHOULDER SOC 0.625 X .500NC X 1.25 S | 2 |
| X24380 | SCREW, CP HEX .375-16NC X .500 S CAD G5 | 2 |
| 939349-3 | WASHER, LOCK H/S .375 REG S ZINC | 2 |
| 943631-70 | PIN, DOWEL .750DIA X 2.000 ASA B5.20 | 2 |
| 32022 | O-RING, 439 NITRILE 70 DURO | 3 |
| XAS-433-01 | O-RING, 433 NITRILE 70 DURO | 3 |
| 32027 | O-RING, 435 NITRILE 70 DURO | 3 |
| 120531-50 | PMP, BKUP RING 5.505 X 5.020 TF LN | 3 |
| 112814 | Pacemaker Pump RAM Wash & packing Lube Cover Assembly | |
| 57720 | ELL, 90°, 1/4 NPT 150# MI | 2 |
| X10020 | TUBING, SQUARE, 3/4 X .120 WALL STEEL TUBING | |
| 002107 | PIPE, 3/4 SCH 40 A53 | |
| X10021 | TUBING, SQUARE, 1 X .120 WALL 1018 | |
| X10022 | STEEL, SHEET, 10 GA, H/R 1020 | |
| 001018 | ANGEL, 1 1/4 X 1 1/4 X 3/16 A36 | |
| 118316 | FTG, HOSE BARB, 1/8 MPS STRATOFLEX | 3 |
| 31090 | HOSE, AIR, 1/4 ARQP #2566-4 | |
| 118317 | FTG, HOSE BARB, 1/4 FJS STRATOFLEX | 3 |
| 118318 | ELBOW, 90°, 04MS-04FP BRASS | 3 |
| X3803 | CAP, PIPE, 3/4 NPT STD | 1 |
| 118321 | PLUG, PIPE SQ. HD, 1/4 NPT MI STD | 2 |
| 118322 | HINGE, CONT, 1/8 X 2W X 1/8 PIN S/S | |
| 118323 | LINKS, CHAIN CAMBELL, COIL LINK CHAIN #2/0 3/16 STRAIGHT | 2 |
| 118324 | BOLT, SNAP, NORTH & JUDD 229 1/4 | 1 |
| 26060601 | TUBING, COPPER, 1/4″ (3/8″ O.D.) X .035W TYPE K | |
| 31187 | ELL, 90° ST, 06MJ X 04MP | 3 |
| 42909 | ELL, 90° ST, 3/4 NPT 150# MI-BLK | 1 |
| 118328 | VALVE, GLOBE, 3/4 WALWORTH W58 | 1 |
| 57611 | NUT, TUBING, 3/8 O.D. ARQP FG2875-6 OR EQUIVALENT | 3 |
| 57610 | FERRULE, 3/8 O.D. ARQP FF9605-6 OR EQUIVALENT | 3 |
| 36627BJ | Pacemaker Pump Discharge Valve Assembly | |
| 40496 | DISCHARGE VALVE SEAT WITH O-RING | 1 |
| 40497 | DISCHARGE VALVE WITH INSERT | 1 |
| 112818 | SPRING, COMPRESSION (75 LB/INCH SPRING RATE) | 1 |
| 120004 | SPRING, COMPRESSION (125 LB/INCH SPRING RATE) | |
| 36585BJ | Pacemaker Pump Suction Valve Assembly | |
| 40111 | VALVE, SUCTION WITH INSERT | 1 |
| 40110 | SEAT, SUCTION VALVE WITH O-RING AND BACK-UP RING | 1 |
| 120145 | SUCTION VALVE GUIDE | 1 |
| 115376 | SUCTION VALVE GUIDE INSERT | 1 |
| 112856 | SPRING, COMPRESSION (60 LB/INCH SPRING RATE) | 1 |
| 112512 | SPRING, COMPRESSION (120 LB/INCH SPRING RATE) | |
| 115823 | SUCTION VALVE SPRING RETAINER | 1 |
| 118488 | NUT, HEX LOCK 1/2-20NF S 22UTB1220 | 1 |
| 112821 | Suction Manifold Standard Fluid End Pacemaker Pump | |
| 43628-4 | FLANGE, BUTTERFLY VALVE 5″ BJ | |
| 112821-2C | CASING, STEEL PER BHI MATERIAL SPEC. 20A27 | |
| 21715 | Assembly Fluid End Adapter 2″-1502 Thread Half Pacemaker Pump | |
| 21714-1 | ADAPTOR, PACEMAKER PUMP FLUID END | 1 |
| 21713-1 | NUT, LOCK PMP FLUID END ADAPTER | 1 |
| XAS-226-02 | O-RING, 568-226-02 P/BJ SPEC 128199 | 1 |
| 21740 | RNG, BACKUP 8-226 PARKER PARBAK | 1 |
| 31069 | SEAL 2″ 1502 NITRILE | 1 |
| 112820 | Pacemaker Pump Discharge Connection Assembly | |
| LXAS-342-02 | ORING, 342 NITRILE 90 DURO | 1 |
| LX309769BJ | BUSH, WELCH H-6448 .5 X 1 X 3.0 | 1 |
| L49418 | UNION SEAL, 2.0 602/1002/1502 NTRL | 1 |
| L45841-1 | PMP, ADPT, DISCH 2.0-1502 FEM X PMP INTEG | 1 |
| L136443 | PMP, DISCH CONN INTEG NUT X 2.0 -1502 FEM | 1 |
| 136542 | Pacemaker Pump Plunger Packing Assembly 3-1/2″ Header Ring-Cylindrical Seal | |
| 129508 | PMP, GLAND PKG 3.5″ CHEVRON | 1 |
| 88998-1 | PLUNGER, PUMP 3.5000 PMP SOLID HARDMETAL COATED | 1 |
| 112880 | PMP, PLUNGER 3.5″ STN STL HRD MTL | |
| 120002 | PMP, CROSSHEAD SEAL COVER ASSY 3.5″ | 1 |
| 128692 | PMP, SEAL RING 3.5″ F/5″ FLUID END | 1 |
| 13654103 | RING, SPACER 3.50″ PL PKG | 1 |
| 120251 | PMP, RING BACK 3.5″ SLC PACK | 1 |
| 112595 | PMP, GASKET CROSSHEAD SEAL COVE R | 1 |
| 120531-55 | PMP, BKUP RING 5.688 X 5.353 TF LN | 1 |
| 120531-46 | PMP, BKUP RING 5.500 X 5.283 TF LN | 1 |
| XAS-356-02 | O-RING, 356 NITRILE 90 DURO | 1 |
| XAS-252-02 | O-RING, 252 NITRILE 90 DURO | 1 |
| 939657-12 | WASHER, LOCK STAR .750 INT S | 1 |
| 118376 | STUD, 0.750NC X 4.000 B7 A193 TAP END | 3 |
| 939207-7 | NUT, HEX 0.750-10NC S ZINC G8 | 1 |
| 31564 | PLUG, PIPE 0.250NPT SOC HD FS | 1 |
| 118318 | ELL, 90 04MS-04FP BRASS | 1 |
| 12949503 | SEAL, ROD 3.50 PRKR 25003500-375 | 1 |
| X304374 | VALVE, CHECK ASSY W/CAP W/O SINTERED FILTER & STRAINER | 1 |
| 118469 | SEAL, OIL NATIONAL 415437 | 1 |
| 13654903 | SEAL, PRES RG 3.50 X 4.50 UTEX 1067-01-0082-19 | 2 |
| 13654803 | RING, HEADER 3.500 X 4.500 PL P KG UTEX IND 0783-01-0082-00 | 1 |
| 136543 | Pacemaker Pump Plunger Packing Assembly 4.0 Header Ring-Cylindrical Seal | |
| L129509 | PMP, GLND PKG 4.0″ CHEVRON | 1 |
| L88998-2 | PLNGR, PUMP 4.0 PMP SOLID HARDMETAL COATED | 1 |
| L112588 | PMP, CROSSHD SEAL CVR | 1 |
| L128429 | PMP, RING SEAL 4.0″ F/5.0″ FE | 1 |
| L13654104 | RING, SPCR 4.00″ PL PKG | 1 |
| L120262 | PMP, RING BACK 4.0″ SLC PACK | 1 |
| L112595 | PMP, GASKET CROSSHD SEAL COVER | 1 |
| L120531-55 | PMP, BKUP RING 5.688 X 5.353 TF LN | 1 |
| L120531-46 | PMP, BKUP RING 5.500 X 5.283 TF LN | 1 |
| LXAS-356-02 | ORING, 356 NITRILE 90 DURO | 1 |
| LXAS-252-02 | ORING, 252 NITRILE 90 DURO | 1 |
| L31564 | PLUG, PIPE 0.250NPT SOC HD FS | 1 |
| L118318 | ELL, 90 04MS-04FP BRASS | 1 |
| L12949504 | SEAL, ROD 4.00 PRKR 25004000-375 | 1 |
| LX304374 | VLV,CHK ASY CAP W/O SINTERED FLTR & STRNR | 1 |
| L118465 | SEAL, OIL NATL 417509 | 1 |
| 13654804 | RING, PRESSURE UTEX P/N 1067-01-0103-81(HARD) | 2 |
| L13654804 | RING, HDER 4.0 X 5.0 PL PKG | 1 |
| 10312288 | ROD, ALL-THD 0.750-10NC X 3.50 A193 B7 | |
| L939207-7 | NUT, HEX 0.750-10NC S ZINC G8 | |
| L939657-12 | WASHER, LOCK STAR .750 INT S | |
| 136544 | Pacemaker Pump Plunger Packing Assembly 4.5 Header Ring-Cylindrical Seal | |
| L129510 | PMP, GLND PKG 4.5″ CHEVRON | 1 |
| L88998-3 | PLNGR, PUMP 4.5 PMP SOLID HARDMETAL COATED | 1 |
| L112588 | PMP, CROSSHD SEAL CVR | 1 |
| L120420 | PMP, RING SEAL 4.5″ SLC CS | 1 |
| L13654105 | RING, SPCR 4.50″ PL PKG | 1 |
| L120298 | PMP, RING BACK 4.5″ SLC | 1 |
| L112595 | PMP, GASKET CROSSHD SEAL COVER | 1 |
| L120531-45 | PMP, BKUP RING 6.250 X 5.915 TF LN | 1 |
| L120531-46 | PMP, BKUP RING 5.500 X 5.283 TF LN | 1 |
| LXAS-360-02 | ORING, 360 NITRILE 90 DURO | 1 |
| LXAS-252-02 | ORING, 252 NITRILE 90 DURO | 1 |
| L31584 | PLUG, PIPE 0.250NPT SOC HD FS | 1 |
| L118318 | ELL, 90 04MS-04FP BRASS | 1 |
| L12949505 | SEAL, ROD 4.50 PRKR 25004500-375 | 1 |
| LX304374 | VLV,CHK ASY CAP W/O SINTERED FLTR & STRNR | 1 |
| L118461 | SEAL, OIL NATL 416154 | 1 |
| L13654905 | RING, PRESS 4.500 X 5.500 | 2 |
| L13654805 | RING, HDER 4.500 X 5.500 PL PKG | 1 |
| 10312288 | ROD, ALL-THD 0.750-10NC X 3.50 A193 B7 | |
| L939207-7 | NUT, HEX 0.750-10NC S ZINC G8 | |
| L939657-12 | WASHER, LOCK STAR .750 INT S | |
| 136545 | Pacemaker Pump Plunger Packing Assembly 5.0 Header Ring-Cylindrical Seal | |
| L129511 | PMP, GLND PKG 5.0″ CHEVRON | 1 |
| L88998-4 | PLNGR, PUMP 5.0 PMP SOLID HARDMETAL COATED | 1 |
| L112588 | PMP, CROSSHD SEAL CVR | 1 |
| L120312 | PMP, RING SEAL 5.0″ SFE | 1 |
| L13654106 | RING, SPCR 5.00″ PL PKG | 1 |
| L120376 | PMP, RING BACK 5.0″ SLC PACK SS | 1 |
| L112595 | PMP, GASKET CROSSHD SEAL COVER | 1 |
| L120531-45 | PMP, BKUP RING 6.250 X 5.915 TF LN | 1 |
| L120531-46 | PMP, BKUP RING 5.500 X 5.283 TF LN | 1 |
| LXAS-360-02 | ORING, 360 NITRILE 90 DURO | 1 |
| LXAS-252-02 | ORING, 252 NITRILE 90 DURO | 1 |
| L31564 | PLUG, PIPE 0.250NPT SOC HD FS | 1 |
| L118318 | ELL, 90 04MS-04FP BRASS | 1 |
| L12949506 | SEAL, ROD 5.00 PRKR 25005000-375 | 1 |
| LX304374 | VLV,CHK ASY CAP W/O SINTERED FLTR & STRNR | 1 |
| L118468 | SEAL, OIL NATL 415725 | 1 |
| L13654906 | RING, PRESS 5.0 X 6.0 | 2 |
| L13654806 | RING, HDER 5.0 X 6.0 PL P KG | 1 |
| 10312288 | ROD, ALL-THD 0.750-10NC X 3.50 A193 B7 | |
| L939207-7 | NUT, HEX 0.750-10NC S ZINC G8 | |
| L939657-12 | WASHER, LOCK STAR .750 INT S | |
| 114501 | Pacemaker II Pump Power End Assembly | |
| L118223 | PMP, PWR FRAME CASTING-MACH | 1 |
| L112846 | PMP, STROKE CNTR DRV ASSY | 1 |
| L112802 | PMP, DRVLNE ADPT SPICER 1800 FLG | 1 |
| L118074 | PMP, DRVLNE ADPT SPICER 1880 1910 FLG | |
| L112592 | PMP, CROSSHD SLV | 3 |
| L112585 | PMP, PINION GEAR CVR | 1 |
| L112557-3 | PMP, CRANKSHAFT ASSY “A” 3.13:1 RATIO | |
| L112557-1 | PMP, CRANKSHAFT ASSY “A” 4.06:1 RATIO | 1 |
| L112583 | PMP, CNTR SHAFT-SNGL END | 1 |
| L118229 | PMP, LUBE ASSY PWR END | 1 |
| L112580 | PMP, CONROD & CROSSHD ASSY | 3 |
| L114529-1 | CVR INSTL/ASSY, PWR END PMP(STD) | 1 |
| L112593 | PMP, SPCR SET, CNTRSHAFT | 2 |
| L112586 | PMP, CNTRSHAFT BRG | 2 |
| L112566 | PMP, CNTRSHAFT BRG | 2 |
| L120061 | PMP, OIL PAN II & IV | 1 |
| L112596 | PMP, BOLT LOCKING FLUID END | 2 |
| L112854 | PMP, GASKET OIL PAN | 2 |
| L112574 | PMP, BRG CONNECTING ROD | 3 |
| L112801 | PMP, BRG RTNR PIN | 4 |
| L112573 | PMP, BRG INSERT CTR MAIN | 2 |
| L112575 | PMP, BRG OUTER MAIN | 2 |
| L112584 | PMP, PINION GEAR CVR | 1 |
| L112594 | PMP, CNTRSHAFT WASHER | 1 |
| L112568-1 | PMP, PINION GEAR-A 4.06:1, LEFT | 1 |
| L112568-2 | PMP, PINION GEAR-A 4.06:1, RIGHT | 1 |
| L112570-1 | PMP, PINION GEAR “C” RATIO 3.13:1 LEFT | |
| L112570-2 | PMP, PINION GEAR “C” RATIO 3.13:1 RIGHT | |
| L112576 | PMP, PINION GEAR CVR GASKET | 2 |
| L112587 | PMP, CNTRSHAFT THRUST PLT | 2 |
| L50758-1 | IND, SIGHT GLASS LUBE | 2 |
| L118331 | SEAL, OIL GARLOCK 53X2798 | 1 |
| L114595 | PMP, CNTRSHAFT SEAL WASHER | 1 |
| L940251-4 | PLUG, PIPE 0.500NPT SQ HD FS CI | 2 |
| LX5051 | NIP, 0.125NPT X 3.0 SCH40 S | 2 |
| L941288-49 | SCR, CP SOC .375-16NC X .750 NYLOK | 16 |
| L940251-5 | PLUG, PIPE 0.750NPT SQ HD CI | 1 |
| LX22049 | PIN, ROLL .250 DIA X .625 | 2 |
| L26028506 | SCR, CP HEX .375-16NCX0.75 S ZINC G5 | 4 |
| L939349-3 | WASHER, LOCK H/S .375 REG S ZINC | 8 |
| L939282-4 | SCR, CP HEX .437-20NFX0.75 S ZINC G5 | 2 |
| L939369-11 | WASHER, FLAT .500 STD S ZINC | 2 |
| L939349-61 | WASHER, LOCK H/S .437 REG S ZIN C | 2 |
| L118334 | SCREEN, DRAIN PAUL MONROE FB-S- C16 | 4 |
| L939282-2 | SCR, CP HEX .312-24NF X .750 S ZINC G5 | 24 |
| L939370-8 | WASHER, FLAT .312 STD S ZINC | 20 |
| LX14305 | WASHER, FNDR .312 ID X 1.50 OD S ZINC | 4 |
| LX14835 | SEAL, HOLE HFMN A-S075 | 1 |
| L57371 | NUT, HEX LOCK 10-32 S ZINC G5 | 1 |
| L56835 | PLUG, PIPE 1.0NPT SQ HD CI | 1 |
| LX23859 | PLUG, DRUM 2.0 MMC 8983T11 | 2 |
| L118352 | PMP, SCR CAP 12PT 11/2-6C-2AX5 | 12 |
| L118333 | BRTHR, AIR LHA DPS-40N06 .375 | 1 |
| LX307069 | NUT, HEX LOCK BEAR HUG BH-16 | 2 |
| L118184 | PMP, DRAIN SCREENMTG PLT | 2 |
| L118339 | RING, QUAD MINN-RBR 14338 CO MP | 1 |
| L940237-8 | CAP, SCRD 1.50 150# MI BLK | 1 |
| 118223 | Cast Machine Drawing Pacemaker Pump Power End Frame | |
| L118352 | PMP, SCREW CAP 12PT 11/2-6C-2AX5 | 12 |
| L118222 | PMP, FRAME/GEAR COVER WELD ASSY | 1 |
| L112554 | PMP, BEARING CAP-CENTER MAIN | 2 |
| L112553 | PMP, BEARING CAP-OUTER MAIN | 2 |
| L943631-36 | PIN, DIAMOND NOSE 0.500 CARR LANE CL-5-DP-Z | 4 |
| L943631-35 | PIN, BULLET NOSE 0.500 CARR LANE CL4-BND | 4 |
| 112846 | Stroke Counter Drive Assembly Pacemaker Pump | |
| 112848-1 | DRIVE SHAFT, STROKE COUNTER, PACEMAKER PUMP | |
| 112847-1 | CONNECTOR, STROKE COUNTER, PACEMAKER PUMP | |
| X11150 | CAP, SPEEDOMETER CONNECTOR S-W 63121 | |
| 939259-9 | NUT, HEX JAM, 1-14NF S G2 | |
| 118301 | SEAL, FASTENER, 1″ PARKER STAT-O-SEAL | |
| 112557 | Crankshaft Assembly Pacemaker Pump | |
| 112558 | CRANKSHAFT, POWER END, PACEMAKER PUMP | 1 |
| 112811 | KEY, CRANKSHAFT, PACEMAKER PUMP | 2 |
| 939291-125 | SCREW, CAP HEX HD, 1/2-20NF X 3 1/4 S G8 | 6 |
| 118488 | NUT, HEX LOCK, 1/2-20NF S 22UTB1220 | 6 |
| X3779 | PLUG, PIPE SOC HD, 1 NPT FS | 2 |
| 943732-74 | PIN, ROLL 1/4 DIA X 1 LG | 2 |
| 941309-183 | SCREW, CAP SOCKET HD, 1/2-20NF X 3 1/2 LG | 12 |
| 118416 | THREAD-LOC LOCTITE #242 50ML OR EQUIVALENT | 1 |
| 112559-1 | GEAR, BULL LEFT HAND RATIO 4.06:1 | 1 |
| 112559-2 | GEAR, BULL RIGHT HAND RATIO 4.06:1 | 1 |
| 112560-1 | GEAR, BULL LEFT HAND RATIO 3.55:1 | |
| 112560-2 | GEAR, BULL RIGHT HAND RATIO 3.55:1 | |
| 112561-1 | GEAR, BULL LEFT HAND RATIO 3.13:1 | |
| 112561-2 | GEAR, BULL RIGHT HAND RATIO 3.13:1 | |
| 112562-1 | GEAR, BULL LEFT HAND RATIO 2.64:1 | |
| 112562-2 | GEAR, BULL RIGHT HAND RATIO 2.64:1 | |
| 112563-1 | GEAR, BULL LEFT HAND RATIO 2.13:1 | |
| 112563-2 | GEAR, BULL RIGHT HAND RATIO 2.13:1 | |
| 112812 | WEIGHT, BALANCE PACEMAKER PUMP | |
| 112813 | WEIGHT, BALANCE PACEMAKER PUMP | |
| 112558RW | CRANKSHAFT, POWER END, PACEMAKER PUMP(REWORKED) | |
| 112583 | Counter Shaft Pacemaker Pump | |
| L50584 | 5 1/2 O.D. X 1/2 WALL 1020 SMLS | |
| LX25721 | 4 3/4 O.D. 4130 ANNEALED | |
| 118229 | Lube Lines Power End Pacemaker Pump Tubing Installation/Assembly | |
| L118343 | ELL, 90 TBG PARKER 169HD-6-4 | 8 |
| L118345 | ELL, 90 TBG PARKER 169HD-5-4 | 3 |
| L118470 | ELL, 90 TBG PARKER 169HD-5-2 | 3 |
| L118348 | ELL, 90 TBG PARKER 169HD-3-2 | 2 |
| L31466 | ADAPTER, HEX NIPPLE 04MP-02MP STEEL | 2 |
| L31564 | PLUG, PIPE .250NPT SOC HD FS | 2 |
| LX3779 | PLUG, PIPE 1.000NPT SOC HD FS | 1 |
| L127922 | PMP, LUBE LINE “A” | 2 |
| L127924 | PMP, LUBE LINE “C” | 4 |
| L127929 | PMP, LUBE LINE “D” | 2 |
| L326448-1 | PMP, LUBE LINE “E” | 1 |
| 112580 | Pacemaker Pump Connecting Rod and Crosshead Assembly | |
| 112599 | CONNECTING ROD ASSY, PACEMAKER PUMP | 1 |
| 112578 | CROSSHEAD, PACEMAKER PUMP | 1 |
| 112579 | PIN, WRIST PACEMAKER PUMP | 1 |
| 114538 | BEARING, INSERT WRIST PIN, PACEMAKER PUMP | 1 |
| 945251-98 | SCREW, SET SOCKET, 5/8-18NF X 5/8 LG HFDP | 1 |
| 939560-65 | SCREW, SET SOCKET, 1/2-13NC X 1/2 LG HFDP | 1 |
| 114520 | Cover Installation/Assembly Power End Pacemaker Pump (Standard/CE Certified) | |
| 135805 | COVER ASSY, POWER END PMP | 1 |
| 134080 | LATCH ASSY, COVER PACEMAKER PUMP WELDED STANDARD | 4 |
| 321817-1 | RETAINER, COVER LATCH PACEMAKER PUMP | |
| 194627 | CAPSCREW, HEX SOC HD, 1/4-28 UNF X 3/8 IN | 8 |
| 26007201 | WASHER, LOCK H/S .250 REG S ZINC | 8 |
Whtsapp: +86 15315008951
Email: info@mud-pump.com
www.mud-pump.com
